NeoMill®-16-Face
The NeoMill-16-Face offers 16 usable cutting edges and is optimal for cast iron (K) and heat-resistant cast steel. Despite its negative insert shape, it ensures low cutting forces and maximum cost-effectiveness in face milling. With a diameter range of 63 to 200 mm and a maximum depth of cut of 4 mm, it enables energy-efficient machining with maximum tool life.
-
Durchmesser (d1)
-
-
Produktfamilie
-
NeoMill®-16-Face
d1: 63 mm; d5: 75,1 mm; l1: 50 mm; z: 6; IFM451-063-CA22-Z06R-ON_U07
Order number: 31002143
In Stock -
NeoMill®-16-Face
d1: 63 mm; d5: 75,1 mm; l1: 55 mm; z: 7; IFM450-063-CA22-Z07R-ON_U07
Order number: 31002155
In Stock -
NeoMill®-16-Face
d1: 80 mm; d5: 92,1 mm; l1: 50 mm; z: 11; IFM450-080-CA27-Z11R-ON_U07
Order number: 31002156
In Stock -
NeoMill®-16-Face
d1: 100 mm; d5: 112,1 mm; l1: 55 mm; z: 9; IFM451-100-CA32-Z09R-ON_U07
Order number: 31002145
In Stock -
NeoMill®-16-Face
d1: 125 mm; d5: 137,1 mm; l1: 63 mm; z: 10; IFM451-125-CA40-Z10R-ON_U07
Order number: 31002146
In Stock -
NeoMill®-16-Face
d1: 125 mm; d5: 137,1 mm; l1: 63 mm; z: 18; IFM450-125-CA40-Z18R-ON_U07
Order number: 31002158
In Stock -
NeoMill®-16-Face
d1: 160 mm; d5: 172,1 mm; l1: 63 mm; z: 23; IFM450-160-CA40-Z23R-ON_U07
Order number: 31002160
In Stock -
NeoMill®-16-Face
d1: 160 mm; d5: 172,1 mm; l1: 63 mm; z: 12; IFM450-160-CA40-Z12R-ON_U07
Order number: 31002148
In Stock -
NeoMill®-16-Face
d1: 200 mm; d5: 212,1 mm; l1: 63 mm; z: 14; IFM450-200-CA60-Z14R-ON_U07
Order number: 31002149
In Stock -
NeoMill®-16-Face
d1: 200 mm; d5: 212,1 mm; l1: 63 mm; z: 30; IFM450-200-CA60-Z30R-ON_U07
Order number: 31002161
In Stock -
NeoMill®-16-Face
d1: 80 mm; d5: 92,1 mm; l1: 50 mm; z: 7; IFM451-080-CA27-Z07R-ON_U07
Order number: 31002144
currently out of stockInform me when article is back in stock -
NeoMill®-16-Face
d1: 100 mm; d5: 112,1 mm; l1: 55 mm; z: 14; IFM450-100-CA32-Z14R-ON_U07
Order number: 31002157
currently out of stockInform me when article is back in stock
